mut_fine_fil.m
SYNTAX: mutuals = mut_fine_fil(acoil_data,bfils,nrecta)
PURPOSE: Compute mutual inductance from a set of axisymmetric
conductors to a set of straight line (filc) conductors. Filament
conductors (identified by setting dR=dZ=0 in acoil_data) are allowed.
INPUT:
acoil_data = data describing geometry of coil set A
Format of this data has each column = [Z;R;dZ;dR;AC;AC2], where:
Z = z centroids of conductors (m)
R = r centroids of conductors (m)
dZ = height of conductors (m)
dR = width of conductors (m)
AC = angle between coil and horizontal (degrees)
AC2 = angle between coil and horizontal (degrees)
At most one of AC, AC2 is nonzero and indicates type of parallelogram:
xxxx
xxxx x
xxxx x
xxxx x --- xxxxxxxxxxxxx
xxxx x | xx xx
--- xxxx x | xx xx
| x X xxxx dZ xx xx
| x (R,Z) xxxx | xx X xx
dZ x xxxx | xx (R,Z) xx
| x xxxx | xx xx
| x xxxx | xx xx
_|_ xxxx ^ --- xxxxxxxxxxxxx ^
AC ) AC2 )
|----------dR----------| |---dR------|
nrecta = rectangle partitioning for conductor set A (see header
documentation for bld_subelements.m)
verbose = print/display verbose info. 0 = no print/display. Numbers>0
give increasingly more information/displays.
bfilcs is a cell array of conductors. Each cell has segments in rows
and 6 columns [x y z dx dy dz] for center and vector of each segment.
OUTPUT:
mutuals = mutual inductance matrix, with rows corresponding to coil
set A, columns to coil set B (Henries)
RESTRICTIONS:
METHOD: Each conductor in set A is partitioned into a bunch of tiny rectangles.
Flux through B is line integrated vector potential from A.
Dependencies