calc_vv_eddy.m
@(#)calc_vv_eddy.m 1.3 04/21/08
SYNTAX: [ivv,t_ivv] ...
= calc_vv_eddy(shotnum,tok_data_struct,t,icoils,options,plasma)
PURPOSE: Calculates VV eddy currents from PF coil ramps, with plasma
effects optionally included.
INPUT: [default]
shotnum = shot number
tok_data_struct = TokSys vacuum object
t = time vector for current waveforms
icoils = coil current matrix (A) (dim = [ntimes,ncoils]
options
cutoff = Cutoff frequency for filtering I_dot (Hz) [100Hz]
cor_offdrf = dI/dt data correction (0=none 1=offset 2=drift) [0]
idxvv = indices of VV elements to use in calculation [1:nv]
inc_pl = include Ip effects (1=yes 0=no) [0]
(requires plasma structure if 1)
ivv0 = initial vv currents (size = length(idxvv)) (A) [0]
n_offdrf = # points to use for offset or drift correction [100]
pause_it = pause after plots for inspection (1=yes 0=no) [0]
ploted = plot eddy current analysis (1=yes 0=no) [1]
resv_fac = multiplication factor for VV resistance [1]
t0 = starting time for VV current integration (s) [0]
plasma
ip = plasma current vector (A)
r_pl = plasma major radius (m)
a_pl = plasma minor radius (m)
k_pl = plasma elongations [1.0]
d_pl = plasma triangularity [0]
n_pl = # pts defining plasma edge [100]
z_pl = plasma vertical positions (m) [0]
OUTPUT:
ivv = VV eddy current vectors (size = [nt,nv]);
t_ivv = VV eddy current time vector (size = nt)
RESTRICTIONS:
1. Assumes that all data is uniformly sampled & in same time intervals
METHOD:
WRITTEN BY: Jim Leuer ON 9/28/06 taken from calc_eddy_flux
MODIFICATIONS:
2008-03-03 NWE generalized to use with any tokamak, removed data
retrieval
=============================================================================
Dependencies