Skip to content

correlate.m

Basic Information

  SYNTAX: [corrfn,time] = correlate(data1,time1,data2,time2,dt,zl)

  PURPOSE:  Compute approximation of analog correlation function:
       corrfn(t) = integral_{-infinity}^{+infinity} data1(s) data2(s+t) ds
    Numerical integration is done so that amplitude is approx. correct
    to represent the cross-correlation of the two continuous signals which
    these sampled data signals represent.  Corresponding time data is
    produced rather than just sample indices.

  INPUT:
    data1, time1 = first signal
    data2, time2 = second signal (optional, if no 2nd signal then
        autocorrelation of 1st signal is computed)
    dt = time between samples (optional, default = min dt of time1, time2)
    zl = zero level = multiplier of average absolute value of
        computed correlation function, used to eliminate "zero"
        values at beginning and end of correlation function
        (optional, default = 1e-8). Set=0 to prevent zero eliminations.

  OUTPUT:
    corrfn, time = correlation function (either cross- or auto-)

Dependencies